Vanquish Titanium Hardware VFD Transmission Kit

This kit includes replacement screws for assembling the VFD Transmission* using lightweight, high-strength titanium. Titanium offers an excellent strength-to-weight ratio and corrosion resistance—ideal for performance-focused builds.

Designed specifically for the VRD Carbon Spec VFD Transmission.
Note: This kit does not include all of the required M2x6mm cap head screws for the scale transmission tunnel shroud.
Installation: Follow the instructions below to avoid damage to components or hardware.

Package Contains:

X4 M2x6mm Caphead
X3 M3x6mm Buttonhead
X4 M3x8mm Caphead
X2 M3x6mm Caphead
X12 M3x12mm Caphead
X1 M3x16mm Caphead
X1 M3x30mm Caphead
X2 M3x12mm Caphead
X1 M4 Nylock Nut

Installation Notice for Titanium Hardware:
Titanium fasteners require specific installation practices to prevent damage or failure.

When installing into plastic:
Do not use lubricant.
Hand-tighten only—do not overtighten, as titanium threads can easily strip plastic.
Avoid using impact drivers.

When installing into metal or threaded inserts:
Always use anti-seize lubricant (nickel- or moly-based) to prevent thread galling. e.g. Permatex 77124 
Do not pair titanium screws with titanium nylock nuts. Use stainless steel or aluminum nylock nuts instead.
Torque values should be reduced by 20–30% compared to steel fasteners.
Ensure threads are clean and lubricated before installation.
Avoid dry fitting and use hand tools for final torque.
Failure to follow these guidelines may result in damaged threads or seized fasteners.