Vanquish Titanium Hardware F10 Portal Front Axle Kit

This kit includes replacement screws for assembling the F10 Portal Front Axle using lightweight, high-strength titanium. Titanium offers excellent strength-to-weight ratio and corrosion resistance, making it ideal for performance-focused builds.

Note: Be sure to follow the installation instructions below to prevent damage to components or hardware.

Package Contains:

X14 M2.5x10mm Caphead
X4 M3x10mm Buttonhead
X1 M3x12mm Buttonhead
X5 M3x12mm Buttonhead
X1 M3x18mm Buttonhead
X4 M3x20mm Buttonhead
X1 M3x22mm Buttonhead
X4 M3x10mm Shoulder Screw (VPS025310)

Installation Notice for Titanium Hardware:
Titanium fasteners require specific installation practices to prevent damage or failure.

When installing into plastic:
Do not use lubricant.
Hand-tighten only—do not overtighten, as titanium threads can easily strip plastic.
Avoid using impact drivers.

When installing into metal or threaded inserts:
Always use anti-seize lubricant (nickel- or moly-based) to prevent thread galling. e.g. Permatex 77124 
Do not pair titanium screws with titanium nylock nuts. Use stainless steel or aluminum nylock nuts instead.
Torque values should be reduced by 20–30% compared to steel fasteners.
Ensure threads are clean and lubricated before installation.
Avoid dry fitting and use hand tools for final torque.
Failure to follow these guidelines may result in damaged threads or seized fasteners.