Vanquish Titanium 5mm Nylock Nut 4pcs

This includes 4x M5 Nylock Nuts made from lightweight, high-strength titanium. Titanium offers excellent strength-to-weight ratio and corrosion resistance, making it ideal for performance-focused builds.

Note: Be sure to follow the installation instructions below to prevent damage to components or hardware.

Package Contains: X4 M5 Titanium Nylock Nuts

Note: Flange on M5 Nylock nut is designed to work with Vanquish Products SLW Hubs and F10 Portal Axles.  

Installation Notice for Titanium Hardware:
Titanium fasteners require specific installation practices to prevent damage or failure.

When installing into plastic:
Do not use lubricant.
Hand-tighten only—do not overtighten, as titanium threads can easily strip plastic.
Avoid using impact drivers.

When installing into metal or threaded inserts:
Always use anti-seize lubricant (nickel- or moly-based) to prevent thread galling. e.g. Permatex 77124 
Do not pair titanium screws with titanium nylock nuts. Use stainless steel or aluminum nylock nuts instead.
Torque values should be reduced by 20–30% compared to steel fasteners.
Ensure threads are clean and lubricated before installation.
Avoid dry fitting and use hand tools for final torque.
Failure to follow these guidelines may result in damaged threads or seized fasteners.