Traxxas Stampede 1/10 4X4 BL-2s Brushless Monster Truck RTR Green

BIGGER AND STRONGER THAN EVER!
Stampede® 4X4 is bigger and stronger than ever with a new clipless body, extended chassis, and huge 5.3″ Sledgehammer® tires for an aggressive monster truck stance. Stampede’s all-new BL-2s™ brushless power system delivers effortless power for all-day fun with an added boost of torque for terrain-shredding burnouts and powerful acceleration. Stampede 4X4 also comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.

NEW BL-2S BRUSHLESS POWER SYSTEM
Stampede 4X4’s BL-2s brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Stampede 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 kV is long-lasting and requires virtually no maintenance.

EXTREME HEAVY DUTY UPGRADE KIT
Stampede 4X4’s pre-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.

CLIPLESS BODY MOUNTING
Stampede 4X4 now uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. A rugged internal cage attaches to the body with molded reinforcements to prevent pull-through damage. Tough roof and tailgate skids protect the body in the event of a rollover.

Features:
BL-2s™ Waterproof Electronic Speed Control
Heat sink accepts accessory cooling fan (3340)
Three Programmable Drive Profiles
Sport Mode - Forward / Brake / Reverse
Race Mode - Forward / Brake
Training Mode™ - 50% Forward / Brake / 50% Reverse (patented)
Traxxas EZ-Set® one-button setup
Built-in two-stage low-voltage detection for LiPo batteries
NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
LiPo battery packs: 2 cells (7.4 volts)
3300 kV Brushless Motor
Integrated cooling fan
Low-maintenance design
Efficient ball bearings
3300 kV
TQ™ 2.4 GHz Transmitter
Full-size 2-channel transmitter
All-day comfort with precise long-range control
Extreme Heavy-Duty Upgrade Kit Installed
Strengthened C-hubs, axle carriers, and steering blocks
Extreme heavy-duty driveshafts
Oversize diameter
6 mm axles
Steel wheel hexes
Clipless ProGraphix® Body
Tough reinforced bumpers
Reinforced inner cage
Rugged roof rollover protector
Tailgate protector
Holds tight for intense action
Quick and easy removal
Chassis
Modular composite tub design
Secure battery hold-down latch
High angle bumpers
Suspension
HD-composite suspension arms
Oil-filled Ultra Shocks
White powder-coated springs
Steering
Chassis-mounted #2075 servo
Dual bellcrank design with integrated servo saver
Drivetrain
Full-time shaft-driven 4-wheel drive
Oil-filled steel gear front and rear differentials
Large 32-pitch steel spur gear
Wheels and Tires
Large 2.8″ graphite gray wheels
Tall 5.3″ Sledgehammer® tires
Sealed Ball Bearings
Hex hardware with Rust-Resistant Black Oxide Coating

What’s In The Box:
Stampede 4X4 with BL-2s ESC and 3300 kV motor
Quick Start Guide
TQ 2.4 GHz radio system
High quality maintenance tools

What You’ll Need:
Batteries
Stampede 4X4 requires a single NiMH or LiPo battery.

Charger
Traxxas EZ-Peak® Live charger (2971) is recommended for easy and fast charging performance

AA Alkaline Batteries
Four AA alkaline batteries for the transmitter

Specs:
Length: 17.87 inches (454 mm)
Width: 13.10 inches (333 mm)
Ground Clearance: 2.44 inches (62 mm)
Weight: 5.98 pounds (2.7 kg) without batteries
Height: 8.34 inches (212 mm)
Wheelbase: 11.62 inches (295 mm)
Front Shock Length: 3.45 inches (88 mm) - Long
Rear Shock Length: 3.98 inches (101 mm) - XX-long
Tires (pre-glued): 5.3 inches (133 mm) tall Sledgehammer®
Wheels: 2.8 inches (71 mm) graphite gray wheels
Speed Control: BL-2s™ electronic speed control
Motor (electric): BL-2s™ 3300 kV sensorless brushless
Gear Pitch: 32 pitch
Overall Drive Ratio: 15.36:1
Differentials: Hardened steel bevel, sealed, limited slip
Chassis Structure / Material: Modular composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Dual bellcrank with integrated servo saver
Radio System: TQ™ 2.4 GHz (2-channel)
Servo: Waterproof 2075
Skill Level: 1
Battery Compartment (L/W/H): 162 mm x 47 mm x 26 mm
Required Batteries: 4 “AA” (transmitter), Vehicle

Motor:
Type: BL-2s 3300 kV sensorless brushless motor
Weight: 7.51 ounces (213 g)
Length: 3.15 inches (80 mm)
Diameter: 1.42 inches (36 mm)
Connector Type: Traxxas Quick Connect Motor Plug

Esc:
Input Voltage (cells): 6-7 Cells NiMH / 2s LiPo
Case Size: 1.53″ (39 mm) x 2.31″ (59 mm) x 1.21″ (31 mm)
Weight: 3.07 ounces (87 g)
BEC Voltage: 6.0 volts
Reverse Delay: Yes, with lockout
Thermal Protection: Two-stage thermal shutdown
Ports: Auxiliary fan