M2C KRATON 8S CARBON BRACE KIT (2mm Wall)

The M2C 3293 MONSTER BRACE KIT for ARRMA 8S line of trucks is the solution!!!!

Bashers have been using these carbon fiber tubes over their braces for years.

I just didn't like the unfinished look, so I came up with a solution that that will clean it up!!

Installation is super easy, just take the ends off your brace, install 1 new rod end, slide the pre-cut carbon tube over your brace!

HAS A 1/8" THRU HOLE IN CASE YOU EVER BREAK THE SCREW, YOU CAN JUST DRILL IT OUT FROM THE FRONT!

PRO TIP!! I have included 2 .5mm shims, you want the ends to be TIGHT.

You want 1/8 to 1/4 of a turn past hand tight and the flats to be in line .

You can use the included shims to achieve this.

You will need to dremel your steering top plate flush as shown (last 2 pics) to use these MONSTER rod ends.