Futaba 7C 2.4GHz W/ R617FS & 4x S3152 Servos

Modeler can change from the default mode (mode 2 in USA) by holding the
Mode and End keys and then turning transmitter On to access the STK feature,
changing mode and turning transmitter Off and then On again.
It is recommended to send transmitter to the Futaba Service Center
to change switch operation.

FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts
very quickly virtually eliminating signal conficts and
interruptions unlike other 2.4GHz systems that only stay on one
or two frequencies
Dual antenna diversity enables FASST system to automatically and
seamlessly select the best reception between the two antennas
built into the receiver ensuring that the aircraft stays under
constant control of transmitter regardless of altitude
Newly designed Dial-N-Key jog dial with joy stick button allows
cursor movement in four directions for very user friendly
navigating through menus and programming

INCLUDES: Futaba 7C 2.4GHz Transmitter
NR-4J 600mAh NiCd Receiver Battery
R617FS FASST 7-Ch Receiver
FBC-19B(4) 120V AC Battery Charger
Four S3152 Digital High Torque Servos
NT8S600B 600mAh 9.6V NiCd Transmitter Battery
Switch Harness w/Charge Cord
Black Transmitter Neck Strap
Servo mounting hardware and instruction manual

SPECS: 7C 2.4GHz Transmitter
Current Drain: 170mA

R617FS FASST Receiver
Size: 1.6 x 1.1 x .35" (40 x 27 x 9mm)
Power Requirement: 4.8 - 6V
Current Drain: 80mA (at no signal)
Weight: 0.34oz (9.8g) with case, 0.25oz (7g) without case

S3152 Digital High-Torque Servo
Speed: .22 sec/60° @ 4.8V, .18 sec/60° @ 6V
Torque: 69 oz-in @ 4.8V, 87 oz-in @ 6V
Weight: 1.5oz (42g)
Length: 1.6" (41mm)
Width: 0.8" (20mm)
Height: 1.5" (38mm)